 |
| |
 |
|
 |  |
| |
|
|
RE5090
Ammeter
Ammeter D.C.
Moving coil meters. Scale length 60mm approx. with
knife edge pointer and anti parallax mirror scale.
Size 80x110x80mm. Accuracy ±2% F.S.D.
| Single Range |
| -01 |
Microammeter, 0-25µA |
| -02 |
Microammeter, 0-50µA |
| -03 |
Microammeter, 0-100µA |
| -04 |
Microammeter, 0-500µA |
| -05 |
Milliammeter, 0-1mA |
| -06 |
Milliammeter, 0-10mA |
| -07 |
Milliammeter, 0-100mA |
| -08 |
Milliammeter, 0-500mA |
| -09 |
Ammeter, 0-1A |
| -10 |
Ammeter, 0-3A |
| -11 |
Ammeter, 0-5A |
| -12 |
Ammeter, 0-10A |
| Double Range |
| -13 |
Ammeter, 0-1A and 0-5A |
| Triple Range |
| -14 |
Ammeter, 0-50mA, 0-500mA and 0-5A |
| Rectifier type. |
| -15 |
Milliammeter, 0-1mA |
| -16 |
Milliammeter, 0-10mA |
| -17 |
Milliammeter, 0-100mA |
| -18 |
Milliammeter, 0-500mA |
| -19 |
Ammeter, 0-1A |
| -20 |
Ammeter, 0-3A |
| -21 |
Ammeter, 0-5A |
| -22 |
Ammeter, 0-10A |
|
|
|
|
RE5091
Voltmeter
Voltmeter D.C.
Moving coil meters. Scale length 60mm approx. with
knife edge pointer and anti parallax mirror scale.
Size 80x110x80mm. Accuracy ±2% F.S.D.
| Single Range |
| -01 |
Microammeter, 0-25µA |
| -02 |
Millivoltmeter, 0-25mV |
| -03 |
Millivoltmeter, 0-1000mV |
| -04 |
Voltmeter, 0-1V |
| -05 |
Voltmeter, 0-3V |
| -06 |
Voltmeter, 0-5V |
| -07 |
Voltmeter, 0-10V |
| -08 |
Voltmeter, 0-100V |
| -09 |
Voltmeter, 0-300V |
| Double Range |
| -10 |
Voltmeter, 0-5V and 0-15V |
| Triple Range |
| -11 |
Voltmeter, 0-3V, 0-10V and 0-15V |
| -12 |
Voltmeter, 0-3V, 0-15V and 0-300V |
| Rectifier type. |
| -13 |
Voltmeter, 0-5V |
| -14 |
Voltmeter, 0-10V |
| -15 |
Voltmeter, 0-50V |
| -16 |
Voltmeter, 0-100V |
|
|
|
|
RE5092
Galvanometer
Moving coil meters. Scale length 60mm approx. with
knife edge
pointer and anti parallax mirror scale. Size 80x110x80mm.
Accuracy ±2% F.S.D.
| -01 |
3.5mA - 0 - 3.5mA, resistance
10ohm |
| -02 |
50µA - 0 - 50µA, resistance
1000ohm |
|
|
|
|
|
|
| RE5093 Digital Meter |
A very convenient meter having a clear 3½ digit
LCD display.
Provided with a control for switching ON and OFF the meter.
Fitted with a pair of 4mm sockets. Operates on 9V battery.
Accuracy ±2%. Size 80x110x80mm approx. With battery.
| |
Range D.C. Current |
| -01 |
0-200µA |
| -02 |
0-2mA |
| -03 |
0-20mA |
| -04 |
0-200mA |
| -05 |
0-2A |
| -06 |
0-10A |
| |
Range D.C. Voltage |
| -07 |
0-200mV |
| -08 |
0-2V |
| -09 |
0-20V |
| -10 |
0-200V |
|
|
|
|
|
| RE5095 Interscale Demonstration
Meter |
| The meter can be used for demonstration of A.C or
D.C. ammeter or voltmeter with different interchangeable
scales. A magnetically damped, spring-controlled moving
coil movement with a pointer, housed in a plastic case
with glass front and rear panels enable all working
parts to be clearly seen. With a pair of 4mm socket
terminals and side zero adjustment control. The scales,
200mm long (approx.) are boldly marked and figured on
both sides. Each scale is fitted through a slot in the
side of the case and has a plug connector which also
serves to locate and align the scale positively in position.
Basic sensitivity of the meter is 5mA, 100mV F.S.D.
Without scale. Accuracy: ± 2.5%
F.S.D.
Scales:
| |
Range D.C. Current |
|
Range A.C. Current |
| -01 |
2.5-0-2.5mA |
-11 |
0-10mA |
| -02 |
0-10mA |
-12 |
0-50mA |
| -03 |
0-100mA |
-13 |
0-100mA |
| -04 |
0-500mA |
-14 |
0-500mA |
| -05 |
0-1A |
-15 |
0-1A |
| -06 |
0-5A |
-16 |
0-10A |
| |
Range A.C. Voltage |
|
Range D.C. Voltage |
| -07 |
5-0-5V |
-17 |
0-5V |
| -08 |
0-5V |
-18 |
0-10V |
| -09 |
0-10V |
-19 |
0-50V |
| -10 |
0-300V |
-20 |
0-300V |
|
|
|
|
|
| RE5098 Power Supply, Low
Voltage |
A low cost good quality power supply unit with 6 voltage
steps from 2V to 12V A.C. & D.C. The voltage is selected
through independent sockets. Two separate sockets are
provided for 6.3V A.C. Provided with overload protection.
Input Voltage - 220V A.C. 50/60Hz
Output Voltage - 2, 4, 6, 8, 10, 12V
A.C. or full wave rectified
D.C. @ 4A
Any other range can also be provided. |
|
|
|
|
|
| RE5099 Power Supply, Continuously
Variable |
A continuously variable power supply, designed to meet
low voltage requirements for the educational laboratories.
Output voltage and current are varied by the use of rotary
switches. The unit is equipped with front panel meters
for reading voltage and current.
Input Voltage
- 220V A.C. 50/60Hz
Output Voltage
- 0-30V D.C. @ 10A
0-30V
A.C.
Any other range can also be provided. |
| |
|
|
|
| |
|
 |
|
 |
|
