| |
 |
 |  |
| RM5043
Falling Body Apparatus |
| A simple apparatus to demonstrate that a body propelled
horizontally will fall vertically at the same rate as
a similar body allowed to fall freely. Comprises of a
spring loaded L-section launcher. There are holes in it
for placing two 19mm dia ball. When the launcher is released
by a push button, one ball falls freely whereas the second
ball is projected forward. Mounted on a wooden box with
a storage pocket for balls. Includes two steel balls. |
| |
|
|
|
|
| RM5044 Loop the Loop |
| A simple apparatus to demonstrate both centripetal acceleration
and conversion of potential energy into kinetic energy.
A steel ball released at the upper end of the loop, it
gains enough energy to transverse the loop without falling.
Comes completely assembled on a wooden base. |
| |
| |
|
|
|
|
| RM5050 Pulley Demonstration
Set |
| This pulley set is an ideal set up to demonstrate law
of conservation of energy, concepts of force and mechanical
equilibrium. Contains a 15x25cm wooden base with mounted
capstan and a screw eye. The set has a 62.5cm vertical
support rod and a 21cm crossbar with clamp, eight single
pulleys, 2 double pulleys, a wheel and axle, six pulley
clamps, 90° clamp, nine slotted masses ranging from
10g to 1000g, seven weight hangers, and a pulley cord. |
| |
| |
|
|
|
|
| RM5052 Pulley Blocks |
Consists of free running, well balanced plastic pulleys.
Each pulley measures 5 cm dia. and is mounted in an alloy
frame
with hook at each end.
| -01 |
Single Pulley |
| -02 |
Double Pulley |
| -03 |
Triple Pulley |
| -04 |
Quadruple Pulley |
|
|
|
|
|
| RM5053 Tandem Pulleys |
These tandem pulleys are very long-lasting. They are
provided with pin bearings and hooks on the top and bottom
for hanging.
| -01 |
Double Pulley (3.8cm and 5cm dia.) |
| -02 |
Triple Pulley (2.5cm, 3.8cm and 5cm dia.) |
|
|
|
|
 |
| RM5055 Rod Mounted Pulley |
| Suitable for use with ordinary laboratory apparatus.
Plastic pulley of dia 3.8cm dia, mounted on a metal rod.
Overall length is about 17.5cm. |
|
|
|
|
| RM5056 Rod Mounting, Bench
Fit, Pulley |
| This 70mm dia. Pulley on a metal clamp, holds firmly
in either a vertical or horizontal position. The bracket
can be clamped to a bench edge of thickness 38mm. |
|
|
|
|
| RM5057 Wheel on
Axis |
Ball bearing, four coaxial pulley mounted on a single
steel rod.
Can be attached to any right-angle clamp. |
|
|
|
| |
