RG5015 Student Microscope-400X
U shaped well balanced heavy base with 90 degree inclinable
body. Stage 112x125mm with 2 stage clips and provision for fitting
mechanical stage. Separate coarse and fine focussing for body
tube. Coarse focussing by rack and pinion mechanism with rack
stop to prevent damage to slides. Triple nose-eyepiece with
accurate parcentring and identical repeated settings.
Optics:
Objectives: Achromatic 4X, 10X and 40X retractable
Eyepiece:
10X Huygenian
Illumination:
Plano-concave mirror 50 mm diameter. Iris diaphragm
with substage condenser N.A.0.65. A substage illuminator
is available as an accessory.
RG5018 Stereo Microscope-20X
Simple to use binocular stereo microscope with a large working
distance and field of view. The whole microscope head is rotatable
through 360° and can be raised or lowered on a vertical
pillar. The interpupillary distance is adjustable between 55mm
and 75mm. The microscope is focussed by a rack and pinion mechanism.
With built in paired 2X achromatic objectives and 10X large
field eyepieces, the total magnification is 20X.
RG5016 Student Microscope-1000X
Similar to Student Microscope - 400X but stage fitted with iris
diaphragm. Abbe condenser N.A. 1.25 and filter support moving
up and down with rack and pinion. These provisions allow use
of 100X oil immersion listed below.
Optics:
Objectives: Achromatic 4X, 10X and 40X retractable
Eyepiece:
10X Huygenian
RG5020 Sub-Stage Illuminator
Light alloy vented housing fitted with glass blue filter.
220V, 15W
bulb. Suitable for Student Microscope.
RG5021 Mechanical Stage
Horizontal movement 70mm and vertical movement 30mm
by
rack and pinion. Both scales are graduated and read by
verniers.
RG5024 Eyepieces
Huygenian and Widefield designs 10X and 15X, 23mm O.D.
Magnification Type
Suitable for 25mm diameter eyepiece tube for attaching
35mm camera.
RG5028 T-Mounts
For attaching RG5027 Microphotography Attachment to
camera.
-01
Canon
-02
Minolta
-03
Nikon
-04
Pentax
RG5032 Hand Microtome
Sample to be sectioned is supported in styropith or
other material and placed in a central well. Turning a
milled knob at the base of the microtome raises the sample
and sections as thin as 20 microns can be cut from the
top using razor. The fine pitch screw has 20mm overall
travel. Top diameter 63mm and well diameter 18mm.
RG5034 Bench Microtome
A precision microtome which has a clamp for fixing it
to the edge of the table. Stainless steel construction.
Sections of 2 micron thickness can be cut using this microtome.
The cutting area diameter is approximately 100mm.
