| |
 |
|
 |  |
|
|
| RC5038 Boss Head |
| Made of die cast alloy, with nickel plated brass screws.
Two V-grooves can hold rods upto 19mm diameter. |
| |
| |
|
|
|
|
| RC5039 Boss Head, Universal |
| This clamp has an adjustable holder swivel at the centre
to fix it to any angle. Can hold rods upto 16mm diameter. |
|
|
|
|
| RC5041 Double Burette
Clamp |
| Made of powder coated mild steel strip. The two clamps
are provided with a spring action to hold the burettes.
Fitted with a boss head for holding to a support rod. |
| |
|
|
|
|
| RC5043 Clamp, Extension |
| Holds objects of diameter up to 75mm. One jaw is fixed
and the other opens up. Jaws are supplied with cork-lining
to hold beakers and flasks firmly and safely. |
| |
|
|
|
|
| RC5044 Clamp, Extension,
Three Finger |
| Rubber lined die cast jaws, with 170mm chrome plated
mild steel rod. Jaws can hold objects up to 75mm diameter. |
| |
| |
|
|
|
 |
| RC5046 Test Tube Rack |
| Hard wooden block, 17x6x3cm(LxWxH) with 4 holes to
accommodate tubes of 25mm diameter and 6 holes to accommodate
tubes of 16mm diameter. |
| |
| RC5047 Test Tube Stand |
Polished wooden base with holes and drying
pins.
| -01 |
2 holes of 28mm, 4 holes of 22mm diameter
and 6 pins. |
| -02 |
2 holes of 28mm, 10 holes of 22mm diameter and
12 pins. |
|
| |
| RC5048 Test Tube Stand |
Polished wooden base with holes only.
| -01 |
2 holes of 28mm and 4 holes of 22mm
diameter. |
| -02 |
2 holes of 28mm and 10 holes of 22mm diameter. |
|
| |
| RC5050 Test
Tube Stand, Polypropylene |
| Made of high density polypropylene. |
| -01 |
6 holes for tube diameter 25mm and
6 drying pins. |
| -02 |
2 holes for tube diameter 25mm, 4 holes for tube
diameter
16mm and 6 drying pins. |
|
|
|
|
|
| RC5052 Pinchcock, Mohr’s |
Made of chrome plated brass wire, with shaped finger
grips.
Fits tubing up to 16mm diameter. |
|
|
|
|
| RC5054 Test Tube Tongs |
| Made of stainless steel wire. Can hold tubes up to 40mm
diameter. Total length 150mm. |
|
|
|
|
| RC5057 Tongs, Beaker |
| For holding any size beaker from 100 to 1500ml. Stainless
steel, with silicone covered jaws. Length 240mm. Jaw spread
150mm. |
|
|
|
|
| RC5058 Tongs, Crucible |
| Stainless steel tongs with jaws corrugated inside. Overall
length 200mm approx. |
|
|
|
| |
